PC Components - Cases

HIGH-AIRFLOW FRONT PANEL
An optimized front panel delivers massive airflow to your system for maximum cooling.

POWERFUL DIRECTED AIRFLOW
Equipped with two CORSAIR 120mm AirGuide fans, utilizing anti-vortex vanesTo concentrate airflow and enhance cooling.

UNLIMITED POSSIBILITIES
Build it how you want today, with an easy upgrade path for tomorrow.

PUT YOUR CONNECTIONS WITHIN EASY REACH
The modern front panel I/O panel includes a USB 3.1 Type-C Port, USB 3.0 port, and a combination audio/microphone jack.

VERTICAL GPU MOUNT READY
With included vertical PCIe slots and a screw mount for a CORSAIR PCI-Express 3.0 extension cable (sold separately) you can show off your GPU and keep it secure at the same time.

EASY SLIDE-ON, SLIDE-OFF SIDE PANEL
Show off your high-profile components and RGB lighting with an easy slide-on, slide-off attach method.

All about Silence
With sound-dampening foam on the front door, sides and top, P10C ensures you the absolute silence.

Antec's Advanced Ventilation
The P10C features an industry-leading ventilation for excellent airflow and 4 x 120 mm silent fans included. The advanced ventilation will provide massive airflow, enhancing the heat dissipation and performance.

All-Round Directed Airflow
With the air-concentrating front filter, P10C pulls in the air from all directions and enhances cooling.

More for Workspace and Education
The 5.25" ODD support is your portal to a world of advanced workspace and education. It's time to have better storage by using the ultra-HD Blu-ray.

Choose Your Side
P10C features a reversible and swing-open front panel design. You can choose to install the front panel on either side according to your dominant hand or PC setup environment.

We've seen a lot, but when we look at the ENDORFY Arx 700 Air we’re quite literally bursting with pride. We’ve put our best solutions into this project – and it’s EPIC (Caps Lock intentional).
This is the largest PC case we’ve ever made (486×228×472 mm). It can easily fit all your components – for example, a tall cooling system (up to 179 mm), 8 fans (including 5 pre-installed Stratus 140 PWM), and virtually any available graphics card (up to 410 mm). The ENDORFY Arx 700 Air keeps them in a pleasant breeze thanks to mesh panels (front and top) that allow the fresh air to flow while blocking dirt and dust from entering your PC case. Like sentinels guarding the gates of heaven.
And all under your watchful eye – through a tempered glass window.

Why so cold?
The interior of the Arx 700 Air is as frosty as the gaze of a cosplayer who’s just had the last ticket to a fantasy convention snatched from under their nose. We're serious – your components won't overheat, even when you crank up the settings in your favorite shooter.
With rendering video in the background.
On the hottest day of the year.
That's because the Arx 700 Air gives you plenty of room to mount up to 8 freezers fans. What’s more, the front and top panels are also filters, so there’s no need for additional dust covers. Compared to traditional solutions, a single layer of filters improves air circulation and makes it easier to keep the components in a pleasant breeze (because cooling is extremely important to us).
Simply put, with such a combo like this, your components will wonder why it’s so cold in here. If components can wonder, ofc.

Cold-hearted <3
Without beating around the bush – the Arx 700 Air has icy heart interior and we’re proud of it. The 5 Stratus 140 PWM fans (developed with Synergy Cooling) are in charge of the arctic temperatures inside your PC case. And thanks to the splitter, you can control them with a PWM signal from a single motherboard connector.
The Stratus 140 PWM is one of our favorite fans. It’s 14 cm tall, so – compared to smaller ones – this bad boy delivers more airflow at the same speed. It also has an optional semi-passive mode that stops the fan at lower loads. You can say goodbye to the monotonous hum in the background.
On top of that, the Stratus 140 PWM uses a durable FDB bearing that guarantees smooth operation in all conditions. It means that you can work go wild on your PC without worrying about a blue screen popping up. Because colorful effects are reserved for ARGB.

Outer space technology
From time to time, we hear that the Arx 700 Air is some kind of space technology. And there is something in it – our PC case looks as if it’s about to conquer the universe. Maybe one day we’ll add an option like that.
The front and top mesh panels serve as filters. This means there's no need to install additional dust covers (and cool air can flow freely inside the case). Each of the elements can be easily removed and cleaned with a cloth or vacuum cleaner (or even rinsed under running water) – in a few minutes, because we know that you have more important things to do.

Window for components
Closed PC cases are cool, but transparent elements – in our opinion – add 1,000 extra points to the look. That's why the Arx 700 Air has a tempered glass side panel that shows off your beautiful components. We all know it’s what's on the inside that counts.

Size does not matter
Supposedly, size doesn’t matter. But when it comes to PC cases, those extra centimeters = more space for your treasures components and better airflow. As a result, we made sure that the Arx 700 Air is our largest PC case – at least for now.
Its size (486×228×472 mm) gives you plenty of room for components – including a tall cooling system (up to 179 mm), 8 fans (including 5 we provide to get you started) and virtually every graphics card available on the market (up to 410 mm). The interior also accommodates simultaneously two radiators up to 360 mm – for efficient cooling of the most demanding builds.
We also left plenty of space for the power supply – you can mount it in any convenient position. Thanks in part to the removable mounting frame.

The CORSAIR 4000D AIRFLOW is a distinctive, high-airflow optimized mid-tower ATX case with easy cable management and two included CORSAIR 120mm AirGuide fans for exceptional cooling

HIGH-AIRFLOW FRONT PANEL
An optimized front panel delivers massive airflow to your system for maximum cooling.

CORSAIR RAPIDROUTE CABLE MANAGEMENT
Route your major cables through a single channel, with a roomy 25mm of space behind the
motherboard for all of your cables, making a clean-looking build easier than ever.

POWERFUL DIRECTED AIRFLOW
Equipped with two CORSAIR 120mm AirGuide fans, utilizing anti-vortex vanesTo concentrate airflow and enhance cooling.

UNLIMITED POSSIBILITIES
Build it how you want today, with an easy upgrade path for tomorrow.

• CORSAIR 4000D & 4000D AIRFLOW - A Clean Start to a Great Build

The H9 Elite is designed to show off every angle of your build with a tempered glass top panel and a built-in RGB & Fan Controller. The unique wraparound glass design with a dual-chamber layout is the perfect showcase for premium components.

- Unique uninterrupted glass panel for a clear view of the interior
- Intuitive cable management and dual chamber design
- Room for ten fans or three 360mm Radiators
- Tempered glass top panel and included RGB & Fan Controller
- Direct airflow to the GPU for handling high-powered components
- Enhanced experience with other products from the NZXT ecosystem
- Includes three F Series 120mm RGB Duo Fans and one F120Q Fan

GPU Capacity
The H9 Elite has 435mm of GPU clearance, offering room for the latest NVIDIA 40 Series and AMD 7000 Series cards.

Fan Capacity
The H9 Elite has room for 10 fans. With the capacity for 3x120mm fans on the side, 3 x 120mm or 2x140mm on the top and bottom, and 1 x120mm on the rear.

Radiator Capacity
The H9 Elite has room for up to a 360mm radiator on the top, bottom, or side, and up to a 120mm radiator on the rear.

• H9 Flow or Elite?!

CREATE IT YOUR WAY

Flatpack Assembly
Besides the clear eco-benefits, we believe flat-packing will provide a fun and satisfying build experience. Welcome to the future of PC DIY.

Fully Modular
Features modular panels that simplify and streamline the usual case prep process. Every panel is separately removable for easy maintenance.

Highly Customizable
An unprecedented level of customizability allows for full creative expression.

Full-sized SPECS, Pint-sized Body
The Qube 500 can house almost anything you would expect from a larger case, from EATX Motherboards and the latest GPUs to dual 280mm radiators.

Build As You Unbox
From the moment you open the box, the build begins with fun and easy step-by-step instructions.

Hardware Compatibilty
The Qube 500 is compatible with 280mm water coolers, 172mm air coolers, 173mm ATX PSUs, E-ATX motherboards and smaller, and 360mm GPUs.

Side Radiator Bracket
The side radiator mount has two positions, allowing you to install a 280mm radiator or provide your GPU with extra airflow.

Built-in Vertical GPU Bracket
Vertically mount your GPU with the included bracket. You can even adjust the distance from the side panel to maintain good airflow.

Accessory Ecosystem
The Qube 500 comes with a living accessory ecosystem. A Gem mini cable manager and a handle-bar is included, and we have prepared some 3D-printable files for you to create your own accessories.

The H5 Elite features a tempered glass front panel and built-in RGB functionality to showcase various lighting components. With optimized thermal performance and intuitive cable management, the H5 Elite is an ideal chassis for most builds.

Fan Capacity
Fan mounts offer space for two 140mm fans on the front panel and two 120mm fans on the top panel.
Top: 2x 120mm
Front: 2x 140mm / 2x 120mm
Rear: 1x 120mm
Bottom: 1x 120mm

Radiator Capacity
The top panel offers space for a 240mm radiator and the front panel provides room for a 280mm radiator.

• Introducing the all-new NZXT H5 Series cases!
• No Airflow? Myth Busted! | NZXT H5 Elite Gaming PC Build | Intel ARC A770 | i7 13700K, ASUS ROG Z690

The Torrent Compact is built to air cool your compact build as efficiently as possible through an open front grille and two of our 180 x 38 mm Dynamic PWM fans (Prisma for RGB version), making it a perfect fit for air cooling aficionados looking for a compact case.

Streamlined inside and out
- The open interior and top mounted PSU provides plenty of breathing room for components and maximizes performance potential
- Space optimized, yet still capable of handling E-ATX motherboards up to 274 mm wide
- Comes with two Prisma ARGB PWM fans (RGB version) or Dynamic X2 PWM fans

Next level GPU cooling
Layout with unobstructed base intake offers exceptional GPU cooling potential

Our biggest fan
- Our Fractal Design 180 x 38 mm fans leverage power, size and thickness for massive air-moving capacity
- Front fan brackets allow for unblocked airflow to the larger fans while catering to standard radiator sizes
- Dust filters for front and bottom easily accessible by removing the front

Quick start, clean finish
- Removable top bezel and routing clips with cable ties make for easy installation and cable management
- A sturdy, vibration-damped drive tray supporting a single HDD or dual SSDs with two optional mounting positions
- Three dedicated SSD brackets included

Included GPU support bracket
Helps your GPU stay level (user assembled, instructions included)

Transparently easy
- Seamless tempered glass panels with bolt-free top-latching mechanisms for easy handling
- LED lights (TG versions) and RGB fans (RGB version) are fully controllable through motherboards supporting addressable RGB (5V)
- Top mounted aerodynamic PSU shroud with integrated ARGB effects (ARGB strip only available on TG and RGB versions)

Removable front filter
- New front panel design with hinged removable mesh and tether-free bezel for easier access to front fan mounts
- Easy-to-clean filters on the front, top and base with full PSU coverage and convenient front access
- New front nylon filter that can be removed for increased airflow

Robust cooling
- Install up to 7 fans, front radiators up to 360 mm, or top radiators up to 240 mm
- Open interior layout creates a smooth airflow path from intake to exhaust
- Install up to 7x 120 mm or 4x 140 mm fans (1x 120 mm and 2x 140 mm Dynamic X2 fans included)

Fully featured
- Seamlessly integrated steel panel with steel frame support and bolt-free top-latching mechanism
- Flexible storage options supporting two 2.5”/3.5” drives and up to four SSDs (two SSD brackets included)
- Improved cable routing with three integrated cable alignment clips and six velcro straps

Top priority access
The fully removable top panel opens to provide excellent interior access

Spaciously compact
Clever layout enables the capacity of much larger cases

Type-C interface
USB 3.1 Gen 2 Type-C front I/O offers fast-charging and speeds up to 10 Gbps

Smooth and quiet operation
The sturdy steel drive trays are vibration-damped by cushioning rubber grommets

Full length shroud
A full-length power supply shroud readily conceals the drive cage and excess cabling

Built to maximize cooling potential straight out of the box, the Torrent comes with a brand-new component layout and two custom-made 180 x 38 mm Dynamic PWM / Prisma RGB fans. The Torrent is a perfect fit for anyone serious about high-end cooling – with or without a custom water loop.

Top-tier airflow
- Designed for exceptional performance at controlled sound levels with included fan hub
- The 38 mm thick blades leverage power, size, and thickness for massive air-moving capacity
- Streamlined through and through for component breathing room and superlative airflow

Let your system breathe
- New layout with expansive base intakes and extra-large bottom fan support offers exceptional GPU cooling
- Optional front and bottom nylon filters included, allowing the user to prioritize between dust filtering or even higher airflow
- Streamlined open interior provides plenty of breathing room for components and maximizes performance potential for both air and water cooling

Next level GPU cooling
Expansive base intakes and extra-large bottom fan support

Streamlined inside and out
- Front fan brackets allow for unblocked airflow to the larger fans while catering to standard radiator and fan sizes
- Both front and bottom panel can support extra-thick radiators and push-pull fan configurations up to 420 mm
- Seven bridgeless expansion slots allow for extensive customization

Quick start, clean finish
- Comes with external cable straps for tidying up behind your computer
- New, pre-installed Nexus 9P Slim PWM fan hub
- Removable top bezel and cable guides with cable straps make for easy installation and cable management
- Two sturdy steel drive trays with vibration-damping rubber grommets for smooth, quiet and reliable operation
- Four dedicated SSD brackets included

Included GPU support bracket
Helps your GPU stay level (user assembled, instructions included)

Transparently easy
- Seamless tempered glass panels (on TG models) with bolt-free top-latching mechanisms for easy handling
- Top mounted aerodynamic PSU shroud with integrated ARGB effects (TG versions only)
- Integrated support for a water-cooling reservoir on the motherboard tray

A case of attitude
The vividly colored motherboard plates, drive trays and exterior accents create a fresh, expressive feel

A hidden compartment
Two neatly concealed 5.25” bays with storage drawer and magnetic cover

Openly expressive
The easy-to-clean front mesh acts as a dust filter while allowing high airflow

Flexible storage support
- Two ultra-versatile storage trays each support a 3.5” and a 2.5” drive simultaneously. A dedicated SSD bracket for 2x 2.5” is also included
- Easy cable management with multiple tie-down points, pre-mounted cable ties and convenient extra-large pass-through holes

Show off your build
- Easily mounted tempered glass side panel lets you showcase your components. (TG models only)
- Holds radiators up to 280 mm in the front, 240 mm in the top and 120 mm in the rear
- The honeycomb patterned front mesh creates a striking visual effect that gives the Pop series a premium feel

The Define 7 XL sets a new standard for what you should expect from a full tower case in terms of modularity, flexibility and ease of use.

Plenty of room for massive builds

- Use the Open Layout for more headroom and gargantuan water-cooling with radiators up to 480 mm in front or top and 280 mm in the base
- Spacious, extensively adaptable dual-layout interior easily accommodates large motherboards up to E-ATX and SSI-EEB
- Two 5.25” ODD bays can be converted to an additional front fan mount with filtered louver covering
- Ventilated PSU shroud with two-part removable cover
- Ultra-slim Nexus+ 2 fan hub connects up to three PWM fans and six 3-pin fans

Superlative storage possibilities

- Mount up to 18 HDD/SSDs plus five SSDs in the Storage Layout (6 HDD/SSD trays + 2 SSD brackets + 2 multi-brackets included)
- Detachable PSU cable shield and integrated cable guides with Velcro straps further simplify cable management behind the board
- Sturdy new HDD cage design with vibration damped trays
- 13 pass-through holes with ten rubber grommets and two removable covers make for clean cable routing regardless of motherboard size

Airflow and cooling

- Outstanding cooling capacity with a total of 9 x 140 mm or 11 x 120 mm fan mounts and three preinstalled Dynamic X2 GP-14 fans
- Easy-to-clean high airflow nylon filters with full PSU coverage and convenient front access
- The two 5.25" ODD bays can be converted to an additional front fan mount with filtered louver covering

Exceptionally silent

Silence-optimized construction with industrial sound-damped front, top, and side panels.

USB Type-C

USB 3.1 Gen 2 Type-C with fast charging support and speeds up to 10Gbps.

SSI-EEB

Easily holds your SSI-EEB motherboard.

Moduvent

Top panel effortlessly swaps from sound damped solid steel to filtered ventilation.

Versatile new Multibracket

The included Multibrackets lets you convert any unused fan position to an HDD, SSD or pump mount.

Built to maximize cooling potential straight out of the box, the Torrent comes with a brand-new component layout and two custom-made 180 x 38 mm Dynamic PWM / Prisma RGB fans. The Torrent is a perfect fit for anyone serious about high-end cooling – with or without a custom water loop.

Top-tier airflow
- Designed for exceptional performance at controlled sound levels with included fan hub
- The 38 mm thick blades leverage power, size, and thickness for massive air-moving capacity
- Streamlined through and through for component breathing room and superlative airflow

Let your system breathe
- New layout with expansive base intakes and extra-large bottom fan support offers exceptional GPU cooling
- Optional front and bottom nylon filters included, allowing the user to prioritize between dust filtering or even higher airflow
- Streamlined open interior provides plenty of breathing room for components and maximizes performance potential for both air and water cooling

Next level GPU cooling
Expansive base intakes and extra-large bottom fan support

Streamlined inside and out
- Front fan brackets allow for unblocked airflow to the larger fans while catering to standard radiator and fan sizes
- Both front and bottom panel can support extra-thick radiators and push-pull fan configurations up to 420 mm
- Seven bridgeless expansion slots allow for extensive customization

Quick start, clean finish
- Comes with external cable straps for tidying up behind your computer
- New, pre-installed Nexus 9P Slim PWM fan hub
- Removable top bezel and cable guides with cable straps make for easy installation and cable management
- Two sturdy steel drive trays with vibration-damping rubber grommets for smooth, quiet and reliable operation
- Four dedicated SSD brackets included

Included GPU support bracket
Helps your GPU stay level (user assembled, instructions included)

Transparently easy
- Seamless tempered glass panels (on TG models) with bolt-free top-latching mechanisms for easy handling
- Top mounted aerodynamic PSU shroud with integrated ARGB effects (TG versions only)
- Integrated support for a water-cooling reservoir on the motherboard tray

Exquisitely Ruthless
MasterBox TD500 Mesh V2’s iconic polygonal design keeps your system looking unique and your gaming sessions streamlined.

FineMesh Performance Front Panel
Polygonal FineMesh features a 3D contour and is also capable of simultaneously providing high airflow and dust filtration.

Available in both Black & White colorations
MasterBox TD500 Mesh V2 is available in both black and white so you can choose the color that best matches your setup!

Three CF120 ARGB Fans Included
Pre-installed CF120 ARGB fans provide ample airflow, ensuring low temperatures, high performance, and eye-catching aesthetics during even the most intense gaming sessions.

USB 3.2 Gen 2 Type C Support
USB 3.2 Gen 2 Type C port built into the I/O panel allows multi-purpose, streamlined data transmission.

ARGB/FAN HUB Included
The included controller allows users to manage systems lighting independently from the hardware configuration and provides the user with 4 additional fan headers in case of need.

Removable Top Panel
The top panel is entirely removable for improved access during assembly and ease of mounting of cooling solutions.

Tool-Free Crystalline TG Side Panel
Featuring a crystalline tempered glass side panel, completely toolless for quick access to the internals.

Versatile Cooling Options
Support for up to seven 120mm fans and 360mm front and top radiator support ensure that performance is not compromised.

PSU Shroud With Removable Cover
MasterBox TD500 Mesh V2’s removable PSU cover allows users to freely decide whether to showcase or keep their PSUs hidden.

Hardware Compatibility
MasterBox TD500Mesh V2 is natively compatible with ITX, M-ATX and ATX motherboards.

DISCOVER HIDDEN POTENTIAL
The ASUS A21 PLUS is a PC case crafted for minimalist mainstream DIY PC builders, with support for a variety of AIO coolers and graphics cards, and the four pre-installed ARGB fans provide plenty of airflow potential to keep things running smoothly.

HIDDEN CONNECTORS
In addition to supporting conventional mini-ITX and micro-ATX motherboards, the A21 PLUS is also compatible with the TUF GAMING B760M-BTF WIFI D4, whose innovative connectors and headers are located on the underside to maximize clean cable management.

Pre-build with Reverse-blade Fan
Pre-installed on the side are reverse blade fans, allowing the unobstructed display of the ARGB fan's beauty without any interference from fan frames.

Support Back-Connect Motherboard
Supporting back-connect motherboards enables easy installation without the worry of forgetting to connect cables, which might otherwise require disassembling graphics cards and coolers.

270-degree Panoramic Display
Drawing inspiration from the MAG logo, create a distinctive chassis design that embodies the unique MAG characteristics. The front interior of the chassis incorporates a space for displaying figurines, complemented by a 270-degree panoramic tempered glass, transforming it into a showcase-style chassis.

GPU Support Stand
Equipped with a level indicator to ensure effortless adjustment of the support height during installation, preventing sagging. Meanwhile, its magnetic base secures more stability within the
chassis.

1 to 4 ARGB-FAN Control Board
This fan control board supports up to 4 x ARGB fan function. Allow you to use the LED switch button to adjust the ARGB lighting intuitionally.