Xbox Series X / S
Nintendo Switch
PlayStation 5
PlayStation 4
On the Go
Other
The SmartFit® One-Touch Height Adjustable Single Monitor Arm makes it easy to find the proper monitor height (and a neutral, comfortable posture) with its patented SmartFit® System and fully articulating design. Tested to meet ANSI/BIFMA standards, a heavy duty build guarantees stability in every position while its gas spring monitor mount makes adjusting your monitor’s height, depth and angle effortless, from landscape to portrait mode. The product's built-in cable management system organises and conceals cables while the arm lifts your external monitor up and out of the way, decluttering and clearing valuable desk space at once. Kensington durability guarantees a more ergonomic workspace for years to come.
With SmartFit®, finding the proper monitor height for maximum comfort as easy as 1-2-3. Simply match your hand size to the colour on the provided chart, set the height to your colour and you’re done.
The Kensington SmartFit® One-Touch Height Adjustable Single Monitor Arm makes adjusting your external monitor’s height, depth and angle effortless. With 170–505mm height adjustment, ±90° swivel and monitor rotation, and ±90° tilt adjustment, the product’s fully articulating design gives you total control over the placement of your monitor, from landscape to portrait mode. Its counterbalance tension adjustment allows you to ‘tighten’ or ‘loosen’ the arm to accommodate a range of monitor weights with the same effortlessness and stability (Allen key included).
The Kensington SmartFit® One-Touch Height Adjustable Single Monitor Arm is stable in any position, supporting a 13′–34′′ flat or curved monitor weighing up to 9kg (19.8lbs).
The Kensington SmartFit® One-Touch Height Adjustable Single Monitor Arm is mountable by c-clamp (desktop thickness range: 10–85mm or grommet (desktop thickness range: or 10–80mm; grommet hole diameter range: 10.5–50mm – tool kit included. Its non-permanent, non-marking installation makes removal easy. An included quick-release, detachable VESA 75/100 plate makes the arm ideal for VESA mountable monitors.
The Kensington SmartFit® One-Touch Height Adjustable Single Monitor Arm’s built-in cable management system keeps cables out of sight and organised, held within the arm itself.
The Kensington SmartFit® One-Touch Height Adjustable Single Monitor is tested to meet ANSI/BIFMA performance and safety standards.
Mounting | |
---|---|
Desk thickness (max) | 8.5 cm |
Desk thickness (min) | 1 cm |
Number of displays supported | 1 |
Panel mounting interface | 75 x 75,100 x 100 mm |
Maximum VESA mount | 100 x 100 mm |
Minimum VESA mount | 75 x 75 mm |
Mounting | Clamp |
Mounting type | Desk |
Maximum screen size | 86.4 cm (34") |
Minimum screen size | 33 cm (13") |
Maximum weight capacity | 9 kg |
Ergonomics | |
---|---|
Tilt adjustment | Yes |
Cable management | Yes |
Angle of rotation | 180° |
Swivel angle | 135° |
Tilt angle range | -90 - 90° |
Height adjustment range | 170 - 505 mm |
Height adjustment type | Manual |
Height adjustment | Yes |
Design | |
---|---|
Certification | Prop 65, BIFMA |
Easy to install | Yes |
Housing material | Aluminium, Plastic, Steel |
Product colour | Black |
Technical details | |
---|---|
Sustainability certificates | RoHS |
Weight & dimensions | |
---|---|
Package type | Box |
Package weight | 4.22 kg |
Package height | 114 mm |
Package depth | 315 mm |
Package width | 496 mm |
Weight | 3.34 kg |
Height | 665 mm |
Depth | 115 mm |
Width | 590 mm |
Logistics data | |
---|---|
Harmonized System (HS) code | 85299097 |
Master (outer) case gross weight | 1.78 kg |
Master (outer) case height | 480 mm |
Master (outer) case length | 514 mm |
Master (outer) case width | 333.5 mm |
The SmartFit® One-Touch Height Adjustable Dual Monitor Arm makes it easy to achieve perfect dual monitor ergonomics (and a neutral, comfortable posture) with its patented SmartFit® System and fully articulating design. Tested to meet ANSI/BIFMA standards, a heavy duty build guarantees stability in every position while its gas spring monitor mount makes adjusting each monitor’s height, depth and angle effortless, from side-by-side to vertically stacked. The product’s built-in cable management system organises and conceals cables while the arms lift your dual monitors up and out of the way, decluttering and clearing valuable desk space at once. Kensington durability guarantees a more ergonomic workspace for years to come.
With SmartFit®, finding the proper monitor height for maximum comfort as easy as 1-2-3. Simply match your hand size to the colour on the provided chart, set the height to your colour and you’re done.
The Kensington SmartFit® One-Touch Height Adjustable Dual Monitor Arm makes adjusting each external monitor’s height, depth and angle effortless. With 170–505mm height adjustment, ±90° swivel and monitor rotation, and ±90° tilt adjustment, the product’s fully articulating design gives you total control over the placement of your dual monitors, from side-by-side to vertically stacked. Its counterbalance tension adjustment allows you to ‘tighten’ or ‘loosen’ each arm to accommodate a range of monitor weights with the same effortlessness and stability (Allen key included).
The Kensington SmartFit® One-Touch Height Adjustable Dual Monitor Arm is stable in any position, supporting a 13′–34′′ flat or curved monitors weighing up to 9kg (19.8lbs).
The Kensington SmartFit® One-Touch Height Adjustable Dual Monitor Arm is mountable by c-clamp (desktop thickness range: 10–85mm or grommet (desktop thickness range: 10–80mm; grommet hole diameter range: 10.5–50mm) – tool kit included. Its non-permanent, non-marking installation makes removal easy. An included quick-release, detachable VESA 75/100 plate makes the arm ideal for VESA mountable monitors.
The Kensington SmartFit® One-Touch Height Adjustable Dual Monitor Arm’s built-in cable management system keeps cables out of sight and organised, held within the arm itself.
The Kensington SmartFit® One-Touch Height Adjustable Dual Monitor is tested to meet ANSI/BIFMA performance and safety standards.
Mounting | |
---|---|
Desk thickness (max) | 8.5 cm |
Desk thickness (min) | 1 cm |
Number of displays supported | 2 |
Panel mounting interface | 75 x 75,100 x 100 mm |
Maximum VESA mount | 100 x 100 mm |
Minimum VESA mount | 75 x 75 mm |
Mounting | Clamp |
Mounting type | Desk |
Maximum screen size | 86.4 cm (34") |
Minimum screen size | 33 cm (13") |
Maximum weight capacity | 9 kg |
Ergonomics | |
---|---|
Rotating | Yes |
Tilt adjustment | Yes |
Pan range | -90 - 90° |
Angle of rotation | 180° |
Swivel angle | 180° |
Tilt angle range | -90 - 90° |
Height adjustment range | 170 - 505 mm |
Height adjustment type | Manual |
Height adjustment | Yes |
Design | |
---|---|
Certification | Prop 65, BIFMA |
Easy to install | Yes |
Housing material | Aluminium, Plastic, Steel |
Product colour | Black |
Technical details | |
---|---|
Sustainability certificates | RoHS |
Weight & dimensions | |
---|---|
Package type | Box |
Package weight | 7.8 kg |
Package height | 465 mm |
Package depth | 132 mm |
Package width | 572 mm |
Weight | 6.03 kg |
Height | 670 mm |
Depth | 125 mm |
Width | 1100 mm |
Logistics data | |
---|---|
Harmonized System (HS) code | 85299097 |
Products per master (outer) case | 2 pc(s) |
Master (outer) case gross weight | 16.6 kg |
Master (outer) case height | 254 mm |
Master (outer) case length | 587 mm |
Master (outer) case width | 483 mm |
The Low-Profile TV Wall Mount - a mount for flush-as-possible TV installations
When viewing locations and TV heights are fixed at optimal positions, the Manhattan Low-Profile TV Wall Mount creates a nearly flush, close-to-the-wall installation that enhances the thin, modern TV silhouette. This mount extends only 21 mm (0.83 in.) from the wall. Constructed of high-quality, powder-coated steel, this ultra-slim TV mount fits flat LCD, LED or plasma TVs up to 70"" and weighing up to 35 kg (77 lbs.). It offers VESA compliance up to 600x400. Intuitive snap-in brackets let you easily put the TV in place for a confident above-the-floor installation. It's ideal for residential, office, hospitality, classroom, conference room, digital signage and other commercial applications.
Mounting | |
---|---|
Number of displays supported | 1 |
Panel mounting interface | 200 x 200,300 x 300,400 x 200,400 x 400,600 x 400 |
Maximum VESA mount | 600 x 400 mm |
Minimum VESA mount | 200 x 200 mm |
Mounting type | Wall |
Maximum screen size | 177.8 cm (70") |
Minimum screen size | 94 cm (37") |
Maximum weight capacity | 35 kg |
Ergonomics | |
---|---|
Tilt adjustment | Yes |
Tilt angle range | 0 - 8° |
Design | |
---|---|
Housing material | Steel |
Product colour | Black |
Technical details | |
---|---|
Sustainability certificates | RoHS |
Weight & dimensions | |
---|---|
Weight | 1.19 kg |
Height | 422 mm |
Width | 665 mm |
Packaging content | |
---|---|
Manual | Yes |
Mounting kit | Yes |
Logistics data | |
---|---|
Harmonized System (HS) code | 85299097 |
Other features | |
---|---|
Depth (max) | 2.1 cm |
Desktop Monitor Stand | Height Adjustable | For Up to 32” Monitors
Customize your workstation, and free up space, with this dual-monitor stand. Mount two monitors on the dual articulating monitor arms, and adjust your displays for optimum viewing with a wide range of motion. The free-standing base gives you flexibility in placing your setup within your workspace.
Enhance Your Productivity
Work more efficiently with a dual-monitor setup. The horizontal dual-monitor stand lets you mount two VESA mount (75x75, 100x100 mm) monitors, up to 32", with a maximum weight capacity of up to 17.6 lb./8 kg per display.
Create a More Ergonomic Workspace
Mounting your displays on a dual-monitor stand above the desk surface enables you to adjust your display height, position and viewing angles for an ergonomic workspace. The swiveling arms provide maximum viewing flexibility, letting you work in comfort.
Height-Adjustable Monitor Mount
It’s easy to customize your setup, placing your monitors at the ideal height. Simply adjust the display height along the 16.7" (42.4 cm) pole. You can align your monitors perfectly with the micro-adjustment feature.
Enjoy Optimum Viewing
Extend the dual articulating arms up to 18.4" (46.8 cm) to position your monitors in the ideal position. Tilt your monitors +90/-40 degrees and swivel +90/-90 degrees for ideal viewing. Rotate your displays for portrait or landscape viewing.
Keep Cables Out of View
Neatly route your cables, keeping them organized and out of view, with the cable-management channels.
ARMDUALSS is backed by a StarTech.com 5-year warranty and free lifetime technical support.
The StarTech.com Advantage
- 32 INCH HEAVY DUTY MONITOR STAND: VESA 75x75/100x100mm compatible desktop multi monitor stand supports 2 large displays up to 32" (17.6lb/8kg) per screen w/horizontal articulation & height adjustment
- WIDE RANGE OF MOTION: Ergonomic monitor stand w/ +90°/-40° tilt, +/-90° swivel, 360° rotating display, & adjustable height along 16.7" (42.4 cm) pole; Arms can rotate for back-to-back monitor setup
- STABLE & NON-SLIP: Aluminum free standing monitor mount w/ u-shaped base (11.8" (300mm) x 20.5" (520mm)) for max stability & flexible placement; Anti-slip rubber pads prevent scratches on desk surface
Mounting | |
---|---|
Number of displays supported | 2 |
Panel mounting interface | 75 x 75,100 x 100 mm |
Maximum VESA mount | 100 x 100 mm |
Minimum VESA mount | 75 x 75 mm |
Mounting | Freestanding |
Mounting type | Desk |
Maximum screen size | 81.3 cm (32") |
Maximum weight capacity | 16 kg |
Ergonomics | |
---|---|
Cable management | Yes |
Pan range | -90 - 90° |
Angle of rotation | 180° |
Tilt angle range | -40 - 90° |
Height adjustment | Yes |
Design | |
---|---|
Certification | REACH, CE |
Housing material | Aluminium, Plastic, Steel |
Product colour | Black, Silver |
Technical details | |
---|---|
Sustainability certificates | RoHS |
Weight & dimensions | |
---|---|
Package weight | 5.21 kg |
Package height | 100 mm |
Package depth | 550 mm |
Package width | 312 mm |
Weight | 4.15 kg |
Height | 590 mm |
Depth | 860 mm |
Width | 290 mm |
Packaging content | |
---|---|
Manual | Yes |
Number of spacers included | 16 |
Number of washers included | 8 |
Number of screws | 48 |
Screws included | Yes |
Number of cable clips | 1 |
Wrench type | Hexagonal wrench |
Wrench included | Yes |
Logistics data | |
---|---|
Harmonized System (HS) code | 85299097 |
Products per master (outer) case | 2 pc(s) |
Master (outer) case height | 230 mm |
Master (outer) case length | 570 mm |
Master (outer) case width | 330 mm |
The Neomounts desk mount, model FPMA-D960D is a tilt-, swivel and rotatable desk mount for 2 flat screens up to 27". This mount is a great choice for space saving placement on desks using a desk clamp.
Neomounts versatile tilt (180°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The mount is manually height adjustable from 0 to 45 centimetres. Depth adjustable from 10 to 43 centimetres. An innovative cable management conceals and routes cables from mount to flat screen. Hide your cables to keep the workplace nice and tidy.
Neomounts FPMA-D960D has three pivot points and is suitable for screens up to 27" (69 cm). The weight capacity of this product is 8 kg each screen. The desk mount is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using Neomounts VESA adapter plates.
For curved monitor screens we recommend our FPMA-D960 PLUS models; our FPMA-D960DVBLACKPLUS is suitable for screens up to 49" (124 cm). The weight capacity of this product is 32 kg. This monitor arm is therefore extremely suitable for widescreens and curved screens.
By using an ergonomic mount neck- and back complaints can be avoided. Ideal for use in offices and on counters or in a reception area.
All installation material is included with the product.
Mounting | |
---|---|
Distance to the wall (max) | 43 cm |
Distance to the wall (min) | 10 cm |
Number of displays supported | 2 |
Maximum VESA mount | 100 x 100 mm |
Minimum VESA mount | 75 x 75 mm |
Mounting | Clamp |
Mounting type | Desk |
Maximum screen size | 68.6 cm (27") |
Minimum screen size | 25.4 cm (10") |
Maximum weight capacity | 8 kg |
Ergonomics | |
---|---|
Cable management | Yes |
Angle of rotation | 360° |
Swivel angle | 180° |
Tilt angle range | 0 - 180° |
Height adjustment range | 0 - 450 mm |
Height adjustment type | Manual |
Height adjustment | Yes |
Design | |
---|---|
Product colour | Black |
Weight & dimensions | |
---|---|
Package height | 145 mm |
Package depth | 239 mm |
Package width | 585 mm |
Height | 450 mm |
Depth | 1430 mm |
Logistics data | |
---|---|
Products per pallet (EU) | 52 pc(s) |
Harmonized System (HS) code | 7326909890 |
Products per master (outer) case | 2 pc(s) |
Master (outer) case height | 340 mm |
Master (outer) case length | 275 mm |
Master (outer) case width | 610 mm |
Other features | |
---|---|
Country of origin | Taiwan |
Monitor Mount | Desk/Grommet Mount | Height Adjustable | For up to 27" Monitors
Create the ultimate ergonomic workstation and free up desk space with this desk-mount triple-monitor arm. You can set up three computer monitors (each up to 27") and create a surround setup to maximize productivity.
Greater Comfort and Productivity
Enhance your productivity and work in comfort with a multi-screen setup. The triple-monitor mount supports three displays, each 13" to 27" in size. Adjust the position of your monitors with 360° rotation and + 30° / -30° tilt for each monitor.
Choose from landscape or portrait screen rotation to customize your workspace. You can set up three displays in landscape position to create a curved surround effect or 'cockpit style' for comfortable viewing. This setup is ideal for editing videos or photos or working with multiple documents. For applications such as web design or coding, you may choose an alternate setup, for example with the center monitor in landscape mode and the outside monitors in portrait position.
Tool-less Height Adjustment
Adjust the display height without tools. You simply turn the adjustment knob to adjust the monitor height, keeping all three monitors at the same level.
Robust Steel Construction
Made of strong and durable steel, the triple VESA mount monitor stand securely supports three separate computer monitors up to 27", with a weight capacity of up to 17.6 lb. or 8 kg per monitor. The three-monitor stand works with VESA mount monitors (75x75, 100x100).
Easy Installation
The triple-monitor arm is easy to set up using the included desk clamp or grommet mount, and comes with cable management clips.
ARMTRIO is backed by a StarTech.com 5-year warranty and free lifetime technical support.
The StarTech.com Advantage
- TRIPLE 27 INCH MONITOR MOUNT: VESA 75x75 or 100x100mm compatible heavy duty steel desktop multi monitor mount supports 3 displays up to 27" (17.6lb/8kg) per screen w/ articulation & height adjustment
- WIDE RANGE OF MOTION: Increase ergonomic comfort with +/-30° tilt & swivel, and 360° rotation; Triple LCD/LED articulating monitor mount with individual micro height adjustment for screen alignment
- THREE MONITORS SIDE-BY-SIDE: Left & right displays can be positioned along their 13.4" arms that can articulate at +30° towards user; Synchronized height adjustability along 17.4" pole (tools incl.)
Mounting | |
---|---|
Desk thickness (max) | 8 cm |
Desk thickness (min) | 1 cm |
Number of displays supported | 3 |
Maximum VESA mount | 100 x 100 mm |
Minimum VESA mount | 75 x 75 mm |
Mounting | Clamp |
Mounting type | Desk |
Maximum screen size | 61 cm (24") |
Minimum screen size | 33 cm (13") |
Maximum weight capacity | 24 kg |
Ergonomics | |
---|---|
Angle of rotation | 360° |
Tilt angle range | -30 - 30° |
Height adjustment | Yes |
Design | |
---|---|
Certification | CE, REACH |
Housing material | Steel |
Product colour | Black |
Technical details | |
---|---|
Maximum stand height | 36.3 cm |
Sustainability certificates | RoHS |
Weight & dimensions | |
---|---|
Package weight | 7.5 kg |
Package height | 124 mm |
Package depth | 653 mm |
Package width | 280 mm |
Weight | 6.2 kg |
Height | 548 mm |
Depth | 110 mm |
Width | 1400 mm |
Packaging content | |
---|---|
Manual | Yes |
Number of washers included | 12 |
Number of screws | 26 |
Screws included | Yes |
Number of end caps included | 4 pc(s) |
Number of rubber pads included | 5 pc(s) |
Number of cable clips | 4 |
VESA mount included | Yes |
Clamp included | Yes |
Wrench included | Yes |
Logistics data | |
---|---|
Harmonized System (HS) code | 85299097 |
Products per master (outer) case | 2 pc(s) |
Master (outer) case height | 265 mm |
Master (outer) case length | 663 mm |
Master (outer) case width | 296 mm |
The Neomounts pole mount, model FPMA-WP440BLACK is a tilt-, swivel and rotatable pole mount for flat screens up to 52" (132 cm).
Ideal to mount screens up to 52" (132 cm) to any pole with a diameter between 30 and 50mm. This mount is a great choice when you want the ultimate viewing flexibility with your flat screen. Effortless position the display in almost any direction.
Neomounts' tilt- (180°), rotate (360°) and swivel (180°)technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. Depth of this mount is 14 centimetres. Cable management conceals and routes cables from mount to flat screen. Hide your cables to keep living room, bedroom or home cinema installation nice and tidy.
Neomounts FPMA-WP440BLACK has two pivot points and is suitable for screens up to 52" (132 cm). The weight capacity of this product is 25 kg each screen. The wall mount is suitable for screens that meet VESA hole pattern 75x75 and 400x400mm. Different hole patterns can be covered using Neomounts VESA adapter plates.
Create a clean design ambiance for your flat screen TV in the living room, bedroom or home cinema.
All installation material is included with the product.
Mounting | |
---|---|
Distance to the wall (max) | 14 cm |
Number of displays supported | 1 |
Maximum VESA mount | 400 x 400 mm |
Minimum VESA mount | 75 x 75 mm |
Mounting type | Wall |
Maximum screen size | 132.1 cm (52") |
Minimum screen size | 58.4 cm (23") |
Maximum weight capacity | 25 kg |
Ergonomics | |
---|---|
Angle of rotation | 360° |
Swivel angle | 180° |
Tilt angle range | 0 - 180° |
Design | |
---|---|
Product colour | Black |
Weight & dimensions | |
---|---|
Package net weight | 4.7 kg |
Package height | 180 mm |
Package depth | 236 mm |
Package width | 458 mm |
Depth | 140 mm |
Logistics data | |
---|---|
Master (outer) case net weight | 9 kg |
Products per pallet (EU) | 48 pc(s) |
Harmonized System (HS) code | 7326909890 |
Products per master (outer) case | 2 pc(s) |
Master (outer) case gross weight | 10 kg |
Master (outer) case height | 430 mm |
Master (outer) case length | 275 mm |
Master (outer) case width | 480 mm |
Other features | |
---|---|
Country of origin | Taiwan |
- 22" (55.9 cm) tall pole provides configuration flexibility. Ideal for larger displays
- Add a third or fourth display using the accessory LX Arm, Extension and Collar Kit
- Position monitors for maximum ergonomic comfort with unparalleled range of motion
- Helps reduce eye, back and neck strain
- Folding arms free up space in constrained areas
- Two-piece mounting clamp has keyhole-shaped holes for quick assembly and two clamping screws for secure installation
- Easily turn one or both screens from landscape mode to portrait mode—view entire pages without scrolling
- Passes Ergotron’s 10,000-cycle motion test, which ensures years of trouble-free height adjustment
- Patented Constant Force™ lift-and-pivot motion technology
Mounting | |
---|---|
Number of displays supported | 2 |
Panel mounting interface | 75 x 75,100 x 100 mm |
Maximum VESA mount | 100 x 100 mm |
Minimum VESA mount | 75 x 75 mm |
Suitable for TV | Yes |
Mounting | Clamp |
Maximum weight capacity (per display) | 10 kg |
Mounting type | Desk |
Maximum screen size | 101.6 cm (40") |
Maximum weight capacity | 20 kg |
Ergonomics | |
---|---|
Rotating | Yes |
Tilt adjustment | Yes |
Cable management | Yes |
Pan range | 0 - 360° |
Angle of rotation | 360° |
Tilt angle range | 5 - 75° |
Height adjustment range | 0 - 330 mm |
Height adjustment | Yes |
Design | |
---|---|
Certification | BIFMA level 2ETL Environmental VOC+ Certified |
Housing material | Aluminium, Steel |
Product colour | Aluminium |
General | |
---|---|
Product Family | LX Series |
Weight & dimensions | |
---|---|
Package weight | 10.9 kg |
Package height | 760 mm |
Package depth | 450 mm |
Package width | 180 mm |
Weight | 8.62 kg |
Packaging content | |
---|---|
Mounting kit | Yes |
VESA mount included | Yes |
Clamp included | Yes |
Logistics data | |
---|---|
Harmonized System (HS) code | 85299097 |
Free-standing Monitor Stand with Rotating Base | Full Motion Articulation | Spring-assisted One-touch Height AdjustmentsThis single monitor stand enables you to raise your monitor off your desk or table to save space while increasing your productivity. With its durable aluminum construction and a sturdy base (7.8"x9.4" / 200mm x 240mm), it can support VESA compatible displays up to 32" and up to 15.4lb / 7kg in weight. The power coated black semi-gloss finish on the support column provides a professional and modern look that will match your monitor and workstation. Please refer to our technical specifications section for more information on the different aspect ratios supported.Adjust your monitor to the ideal positionThe free-standing monitor stand features a wide range of motion so you can position your monitor to the ideal viewing angle, allowing you to work more comfortably and reduce eye and neck strain. You can easily tilt +/-15°; swivel +/-180°; and make height adjustments to fully adjust your monitor so it can meet your ergonomic needs. With a rotating base, this monitor stand lets you swivel your display a total range of +/- 40°.Easy one-touch height adjustmentsThe spring-assisted monitor stand offers a total adjustment range of 10.4" to 16.3" (265mm to 415mm) from the surface or your desk. Height adjustments are easy to make with the built-in easy-access lever at the top of the stand.Keep a tidy setup and protect your deskThis monitor stand lets you keep an organized desk/workstation with the built-in cable management slot at the lower portion of the column. It is equipped with rubber anti-slip pads that will keep your desk or table surface protected from scratches or scuffs.FPPNEUSTND is backed by a StarTech.com 5-year warranty and free lifetime technical support.The StarTech.com Advantage
Mounting | |
---|---|
Number of displays supported | 1 |
Maximum VESA mount | 100 x 100 mm |
Minimum VESA mount | 75 x 75 mm |
Maximum weight capacity (per display) | 7 kg |
Mounting type | Desk |
Maximum screen size | 86.4 cm (34") |
Minimum screen size | 81.3 cm (32") |
Maximum weight capacity | 7 kg |
Ergonomics | |
---|---|
Tilt adjustment | Yes |
Cable management | Yes |
Angle of rotation | 180° |
Swivel angle range | -40 - 40° |
Tilt angle range | -15 - 15° |
Height adjustment range | 265 - 415 mm |
Height adjustment | Yes |
Design | |
---|---|
Housing material | Aluminium |
Product colour | Black |
Technical details | |
---|---|
Sustainability certificates | RoHS |
Weight & dimensions | |
---|---|
Package weight | 3.6 kg |
Package height | 112 mm |
Package depth | 275 mm |
Package width | 435 mm |
Weight | 3.6 kg |
Height | 570 mm |
Depth | 240 mm |
Width | 200 mm |
Packaging content | |
---|---|
Number of washers included | 4 |
Number of screws | 16 |
Screws included | Yes |
VESA mount included | Yes |
Wrench type | Hexagonal wrench |
Logistics data | |
---|---|
Harmonized System (HS) code | 85299097 |
Products per master (outer) case | 1 pc(s) |
Master (outer) case height | 112 mm |
Master (outer) case length | 275 mm |
Master (outer) case width | 435 mm |
The Neomounts desk mount, model FPMA-D935POLE70 is a tilt-, swivel and rotatable desk mount for flat screens up to 30". This mount is a great choice for space saving placement on desks using a desk clamp.
Neomounts versatile tilt (180°), rotate (360°) and swivel (360°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The mount is manually height adjustable from 0 to 80 centimetres. Depth adjustable from 12 to 50 centimetres. An innovative cable management conceals and routes cables from mount to flat screen. Hide your cables to keep the workplace nice and tidy.
Neomounts FPMA-D935POLE70 has three pivot points and is suitable for screens up to 30" (76 cm). The weight capacity of this product is 10 kg. The desk mount is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using Neomounts VESA adapter plates.
By using an ergonomic mount neck- and back complaints can be avoided. Ideal for use in offices and on counters or in a reception area.
All installation material is included with the product.
Mounting | |
---|---|
Distance to the wall (max) | 50 cm |
Distance to the wall (min) | 12 cm |
Number of displays supported | 1 |
Maximum VESA mount | 100 x 100 mm |
Minimum VESA mount | 75 x 75 mm |
Mounting | Clamp |
Mounting type | Desk |
Maximum screen size | 76.2 cm (30") |
Minimum screen size | 25.4 cm (10") |
Maximum weight capacity | 10 kg |
Ergonomics | |
---|---|
Angle of rotation | 360° |
Swivel angle | 360° |
Tilt angle range | 0 - 180° |
Height adjustment range | 0 - 800 mm |
Height adjustment type | Manual |
Height adjustment | Yes |
Design | |
---|---|
Product colour | Silver |
Weight & dimensions | |
---|---|
Package height | 103 mm |
Package depth | 161 mm |
Package width | 809 mm |
Height | 800 mm |
Logistics data | |
---|---|
Products per pallet (EU) | 57 pc(s) |
Harmonized System (HS) code | 85299097 |
Products per master (outer) case | 3 pc(s) |
Master (outer) case height | 370 mm |
Master (outer) case length | 190 mm |
Master (outer) case width | 830 mm |
Other features | |
---|---|
Country of origin | Taiwan |
Enjoy easy display movement and more desktop workspace.
The Manhattan Universal Gas Spring Monitor Mount offers a single-jointed gas-spring arm that securely holds one 17" to 32" TV or monitor. This mount's gas spring promotes easy movement of the display to a more comfortable viewing angle with the lightest touch. Designed to give back much needed desktop real estate and maximize productivity, the Manhattan Universal Gas Spring Monitor Mount provides more flexibility, reach, and overall enjoyment of whatever task is at hand.
Mounting | |
---|---|
Number of displays supported | 1 |
Panel mounting interface | 75 x 75,100 x 100 mm |
Maximum VESA mount | 100 x 100 mm |
Minimum VESA mount | 75 x 75 mm |
Mounting type | Wall |
Maximum screen size | 81.3 cm (32") |
Minimum screen size | 43.2 cm (17") |
Maximum weight capacity | 8 kg |
Ergonomics | |
---|---|
Tilt adjustment | Yes |
Angle of rotation | 360° |
Swivel angle range | -90 - 90° |
Tilt angle range | -35 - 35° |
Design | |
---|---|
Housing material | Aluminium, Plastic, Steel |
Product colour | Black |
Weight & dimensions | |
---|---|
Weight | 1.9 kg |
Height | 280 mm |
Width | 114 mm |
Packaging content | |
---|---|
Manual | Yes |
Logistics data | |
---|---|
Harmonized System (HS) code | 85299097 |
Other features | |
---|---|
Depth (max) | 52.1 cm |
Monitor Mount | For up to 34” VESA Mount Displays | Integrated Cable Management | 2-Year Warranty
Save space with this premium desk mount monitor arm, by suspending your screen above your desk.
Versatile Use
Use the single arm monitor mount to mount your VESA mount monitor (75x75, 100x100) up to 34”.
Sleek and Stable Design
Made of aluminum, the VESA mount monitor stand provides stable support for your display, with a weight capacity of up to 17.6 lb. (8 kg). Built-in USB 3.0 ports provide convenient connectivity for your computer.
The arm extends 20.2” (514 mm) to allow a wide range of motion. Move the monitor holder arm effortlessly side to side to adjust your screen.
With its articulating arm, the monitor mount makes it easy to find the right viewing angle. Pan +90/-90 degrees left or right and tilt your display +90/-90 degrees up or down. For landscape or portrait viewing, rotate your display +90/-90 degrees.
Height Adjustment
Work in comfort with this height adjustable monitor stand that lets you raise or lower the monitor arm along the pole, up to 24.4” (620 mm).
The Choice of IT Pros Since 1985
StarTech.com conducts thorough compatibility and performance testing on all our products to ensure we are meeting or exceeding industry standards and providing high-quality products to IT Professionals. Our local StarTech.com Technical Advisors have broad product expertise and work directly with our StarTech.com Engineers to provide support for our customers both pre and post-sales
The ARMPIVOT2USB3 is backed by a StarTech.com 2-year warranty and free lifetime technical support.
The StarTech.com Advantage
- 34 INCH HEAVY DUTY MONITOR MOUNT: VESA 75x75/100x100mm compatible articulating single monitor mount supports 1 display up to 34" (17.6lb/8kg) w/ full motion articulation & 2 USB 3.0 passthrough ports
- EASY INSTALLATION: Tighten c-clamp from top w/ incl. tool or grommet mount to secure to desktop (10mm-50mm); Easily mount display w/ detachable VESA plate; tools incl. to adjust articulation tension
- WIDE RANGE OF MOTION: Ergonomic monitor arm increases comfort & productivity w/ +/-90° tilt, +/-90° swivel, 90° rotating screen (landscape/portrait) & toolless adjustable height along 11.8"/300mm pole
Mounting | |
---|---|
Desk thickness (max) | 5 cm |
Desk thickness (min) | 1 cm |
Extension arm (max) | 51.4 cm |
Number of displays supported | 1 |
Maximum VESA mount | 100 x 100 mm |
Minimum VESA mount | 75 x 75 mm |
Mounting | Clamp |
Mounting type | Desk |
Maximum screen size | 86.4 cm (34") |
Minimum screen size | 43.2 cm (17") |
Maximum weight capacity | 8 kg |
Ergonomics | |
---|---|
Angle of rotation | 90° |
Swivel angle | 90° |
Tilt angle range | -90 - 90° |
Height adjustment | Yes |
Design | |
---|---|
Certification | CE, REACH |
Housing material | Aluminium |
Product colour | Black |
Technical details | |
---|---|
Sustainability certificates | RoHS |
Weight & dimensions | |
---|---|
Package weight | 4.15 kg |
Package height | 117 mm |
Package depth | 240 mm |
Package width | 435 mm |
Weight | 3.25 kg |
Height | 620 mm |
Depth | 594 mm |
Width | 35 mm |
Packaging content | |
---|---|
Grommet plate included | Yes |
Number of washers included | 4 |
Number of screws | 9 |
Screws included | Yes |
Number of cable clips | 1 |
Wrench type | Hexagonal wrench |
Logistics data | |
---|---|
Harmonized System (HS) code | 85299097 |
Products per master (outer) case | 6 pc(s) |
Master (outer) case height | 375 mm |
Master (outer) case length | 450 mm |
Master (outer) case width | 500 mm |
Double-Monitor Mount | Low-Profile Base | Height Adjustable | For up to 27” Monitors
This deskmount dual-monitor arm lets you mount two 13” to 27” VESA mount monitors, each weighing up to 17.6 lb. (8 kg), onto a single low-profile base. It gives you flexible desk-clamp or grommet-hole mounting, letting you save space while creating an ergonomic workspace in any office environment.
Free Up Desk Space
With a stable dual-arm design, the double-monitor mount lets you create more usable work space by mounting your monitors side by side on a single base. The screen mount features a flat low-profile back that lets you position your displays against a wall or cubicle wall.
Optimal Viewing
The computer monitor desk mount features adjustable height along the pole. The smooth +/- 30° tilt motion and +/- 30° swivel make it easy to find the optimal viewing angle. You can also rotate your display 360° for portrait or landscape viewing, and make sure your displays are perfectly aligned using the micro-adjustment knob.
Flexible Installation
The dual-monitor arm is easy to install, with the desk-clamp or grommet mount (hardware included). Integrated cable management keeps your workspace organized. It works well with most desks, including sit-stand workstations.
Boost Productivity with Multiple Monitors
Adding two monitors gives you the extra screen space you need to simplify multitasking and maximize your productivity.
ARMBARDUOG is backed by a 5-year StarTech.com warranty and free lifetime technical support.
The StarTech.com Advantage
- Save space by mounting two monitors up to 27” onto a single base (max. weight 17.6 lb. / 8 kg)
- Keep monitors aligned with micro-adjustment
- Work comfortably with adjustable height, +/- 30°tilt, +/- 30°swivel and 360° rotation
Mounting | |
---|---|
Desk thickness (max) | 8 cm |
Desk thickness (min) | 1 cm |
Number of displays supported | 2 |
Panel mounting interface | 75 x 75,100 x 100 mm |
Maximum VESA mount | 100 x 100 mm |
Minimum VESA mount | 75 x 75 mm |
Mounting | Clamp |
Mounting type | Desk |
Maximum screen size | 68.6 cm (27") |
Minimum screen size | 33 cm (13") |
Maximum weight capacity | 16 kg |
Ergonomics | |
---|---|
Cable management | Yes |
Number of arms | 2 |
Angle of rotation | 360° |
Swivel angle range | -30 - 30° |
Tilt angle range | -30 - 30° |
Height adjustment | Yes |
Design | |
---|---|
Certification | CE, REACH |
Housing material | Aluminium, Plastic, Steel |
Product colour | Black |
Technical details | |
---|---|
Sustainability certificates | RoHS |
Weight & dimensions | |
---|---|
Package weight | 5.7 kg |
Package height | 120 mm |
Package depth | 478 mm |
Package width | 248 mm |
Weight | 4.9 kg |
Height | 515 mm |
Depth | 870 mm |
Width | 135 mm |
Packaging content | |
---|---|
Manual | Yes |
Grommet base plate included | Yes |
Number of washers included | 8 |
Number of screws | 18 |
Screws included | Yes |
Number of end caps included | 2 pc(s) |
Number of rubber pads included | 5 pc(s) |
Number of cable clips | 4 |
VESA mount included | Yes |
Clamp included | Yes |
Wrench type | Hexagonal wrench |
Wrench included | Yes |
Logistics data | |
---|---|
Harmonized System (HS) code | 85299097 |
VESA Monitor Mount | Works with iMac / Apple Cinema / Thunderbolt Displays | Up to 34" Monitors
This robust steel single monitor stand, with its sleek silver finish, provides secure support for your display and makes an attractive addition to your workspace. The monitor desk stand allows flexible placement of your computer screen, and is easily adjustable for ideal viewing.
Versatile Use with Multiple Monitors
The monitor mount holds your display with ease, supporting monitors from 12" to 34" up to a maximum weight capacity of 30 lb. (14kg).
For added flexibility, you can use the included hardware to mount your Apple Cinema Display, Thunderbolt Display or Apple iMac. The stand works with any Apple Cinema Display or Thunderbolt Display that came with a removable stand or built-in VESA mount adapter. It also works with the 24-inch iMac and 27-inch iMac with a removable stand, or with a built-in VESA mount adapter.
Work in Comfort
The monitor desk stand features a 15" (380 mm) tall support post, providing a wide range of height adjustment for greater comfort while you work. Adjust your display height, position and viewing angles easily to create an ergonomic work environment.
Optimum Viewing
The adjustable monitor stand lets you mount a display on the desk stand, with tilt and swivel adjustments for ideal positioning. For viewing longer pages or blocks of code without scrolling, the desk monitor stand also supports landscape-to-portrait display rotation.
Steel Construction and Easy Setup
Made of durable steel, the single monitor mount provides easy set-up for a wide range of monitors. The integrated cable management helps to keep your cables organized and out of view.
The TAA compliant ARMPIVSTND is backed by a StarTech.com 10-year warranty and free, lifetime technical support.
The StarTech.com Advantage
- Experience an ergonomic workspace, through simple display height, position and viewing angle adjustments
- Maximize space efficiency by elevating your display above the desk surface
Mounting | |
---|---|
Number of displays supported | 1 |
Maximum VESA mount | 100 x 100 mm |
Minimum VESA mount | 75 x 75 mm |
Mounting | Freestanding |
Mounting type | Desk |
Maximum screen size | 86.4 cm (34") |
Minimum screen size | 30.5 cm (12") |
Maximum weight capacity | 14 kg |
Ergonomics | |
---|---|
Rubber feet | Yes |
Pan range | 0 - 60° |
Angle of rotation | 360° |
Tilt angle range | -15 - 45° |
Height adjustment | Yes |
Design | |
---|---|
Certification | CE, TAA, REACH |
Housing material | Aluminium, Steel |
Product colour | Silver |
Technical details | |
---|---|
Sustainability certificates | RoHS |
Weight & dimensions | |
---|---|
Package weight | 3.3 kg |
Package height | 118 mm |
Package depth | 538 mm |
Package width | 273 mm |
Weight | 2.4 kg |
Height | 105 mm |
Depth | 260 mm |
Width | 330 mm |
Packaging content | |
---|---|
Manual | Yes |
Number of screws | 10 |
Screws included | Yes |
Number of end caps included | 5 pc(s) |
Number of cable clips | 1 |
Wrench included | Yes |
Logistics data | |
---|---|
Harmonized System (HS) code | 85299097 |
Products per master (outer) case | 4 pc(s) |
Master (outer) case height | 304 mm |
Master (outer) case length | 553 mm |
Master (outer) case width | 500 mm |
Monitor Mount | Desk/Grommet | Double Joint | Adjustable | For up to 32" Monitors
Work in comfort while saving space. This highly functional desk mount dual monitor arm brings you a cost-effective and versatile solution to an ergonomic workspace. Enjoy a wide range of motion with the double-jointed crossbar design plus tilt, swivel, rotation and height adjustment.
Make your Workspace Work for You
The multi monitor mount gives you the flexibility to set-up your desktop your way. Each of the articulating arms extends a full 15.7" (39.9 cm) to adjust to your needs.
The flexible double joints on the arms give you numerous options to position your monitors. You can place your monitors to face you, or even turn your monitors right around, 180-degrees, to share your screen with others. If you choose, you can also tighten the joints, making your setup as stationary as you like.
Crossbar Design Made of Steel
The cross-bar design provides a clean and simple look, while keeping monitors aligned. Use the micro-adjustment knob to align your monitors perfectly.
Made of steel, the rugged two display arm securely supports two VESA mount (75x75, 100x100) monitors up to 32", with a weight capacity of 17.6 lb. (8 kg) per monitor.
Find the Ideal Viewing Angle
The double monitor arm lets you smoothly and effortlessly adjust the position of your screens for optimum viewing. Tilt your monitors +45/-45 degrees. Swivel +90/-90 degrees to the left or right. Rotate your monitors to portrait or landscape position with the 360-degree rotary VESA plate.
Height Adjustable
Adjust your monitors to the desired height. The dual screen mount is height adjustable along the 17.4" (44.3 cm) pole.
Easy to Install
The multiple monitor mount is easy to install, using the C-clamp to attach the mount to the edge of your desk, table, or counter or mounting it through a grommet hole. The detachable VESA plate makes it easy to attach or remove your monitor. The built-in cable management keeps your cables neatly tucked away.
ARMDUAL2 is backed by a StarTech.com 5-year warranty and free, lifetime technical support.
The StarTech.com Advantage
- 32 INCH LARGE MONITOR SUPPORT: VESA 75x75mm / 100x100mm compatible multi monitor mount supports 2 large monitors up to 32" (17.6 lb / 8 kg) per arm w/ horizontal articulation & basic height adjustment
- WIDE RANGE OF MOTION: Double monitor mount increases ergonomic comfort and productivity with +45/-45° tilt, +90/-90° swivel, 360° rotating display, and adjustable height along the 15.7" (39.8 cm) pole
- ADJUSTABLE SET UP: Use the desk-clamp (C-clamp) or grommet mount to easily mount and tighten by hand to a desktop & cable management clips can hold incl. tools for quick height & angle adjustment
Mounting | |
---|---|
Desk thickness (max) | 8.8 cm |
Desk thickness (min) | 1 cm |
Extension arm (max) | 39.9 cm |
Number of displays supported | 2 |
Maximum VESA mount | 100 x 100 mm |
Minimum VESA mount | 75 x 75 mm |
Mounting | Clamp |
Mounting type | Desk |
Maximum screen size | 81.3 cm (32") |
Maximum weight capacity | 16 kg |
Ergonomics | |
---|---|
Cable management | Yes |
Angle of rotation | 360° |
Swivel angle range | -90 - 90° |
Tilt angle range | -45 - 45° |
Height adjustment | Yes |
Design | |
---|---|
Certification | REACH, CE |
Housing material | Steel |
Product colour | Black |
Technical details | |
---|---|
Sustainability certificates | RoHS |
Weight & dimensions | |
---|---|
Package weight | 4.25 kg |
Package height | 135 mm |
Package depth | 450 mm |
Package width | 250 mm |
Weight | 4.25 kg |
Height | 548 mm |
Depth | 500 mm |
Width | 965 mm |
Packaging content | |
---|---|
Manual | Yes |
Grommet plate included | Yes |
Grommet base plate included | Yes |
Number of spacers included | 16 |
Number of washers included | 8 |
Number of screws | 37 |
Number of cable clips | 2 |
Clamp included | Yes |
Wrench type | Hexagonal wrench |
Wrench included | Yes |
Logistics data | |
---|---|
Harmonized System (HS) code | 85299097 |
Products per master (outer) case | 1 pc(s) |
Master (outer) case height | 135 mm |
Master (outer) case length | 450 mm |
Master (outer) case width | 250 mm |
Whether at home or in the office, everyone deserves a workspace that looks great and makes them feel their best. Create a neat, productive workspace with this affordable monitor arm that's easy to set up and backed by Ergotron's trusted reputation for quality.
Mounting | |
---|---|
Clamp mount desk thickness (max) | 5 cm |
Desk thickness (max) | 5 cm |
Extension arm (max) | 15.4 cm |
Number of displays supported | 1 |
Panel mounting interface | 75 x 75,100 x 100 mm |
Maximum VESA mount | 100 x 100 mm |
Minimum VESA mount | 75 x 75 mm |
Suitable for TV | Yes |
Mounting | Clamp |
Mounting type | Desk |
Maximum screen size | 86.4 cm (34") |
Maximum weight capacity | 8 kg |
Ergonomics | |
---|---|
Feet colour | White |
Feet | Yes |
Tablet compartment | No |
Drawers | No |
Built-in wireless charger | No |
Rotating | Yes |
Tilt adjustment | Yes |
On/off switch | No |
Illumination LED | No |
Cable management | Yes |
Pan range | 0 - 180° |
Angle of rotation | 360° |
Swivelling | Yes |
Adjustable depth | Yes |
Height adjustment range | 199 - 447 mm |
Height adjustment type | Manual |
Height adjustment | Yes |
Design | |
---|---|
Easy to install | Yes |
Orientation | Landscape/Portrait |
Housing material | Aluminium, Steel |
Product colour | Black, White |
General | |
---|---|
Product Family | NX Series |
Technical details | |
---|---|
Sustainability compliance | Yes |
Pallet net height | 160 cm |
Pallet net length | 120 cm |
Pallet net width | 100 cm |
Warranty period | 5 year(s) |
Packaging content | |
---|---|
Manual | Yes |
Mounting kit | Yes |
VESA mount included | Yes |
Clamp included | Yes |
Packaging data | |
---|---|
Quantity per pack | 1 pc(s) |
Other features | |
---|---|
Country of origin | China |
A TV wall mount for anywhere
Overcome an odd floor plan, annoying glare or awkward furniture placement that can limit the enjoyment of your flat-panel TV. The Manhattan Universal Flat-Panel TV Articulating Wall Mount folds nearly flat against the wall and safely extends on a strong arm frame that helps you achieve prime viewing positions. VESA-compliant and constructed of quality materials, this articulating wall mount fits a range of display sizes for a secure and confident above-the-floor TV installation. It's the perfect fit for mounting a TV in your living room, bedroom or den, as well as for commercial uses in hotels, classrooms, conference rooms, for digital signage and more. Wherever you install it, the Manhattan Universal Flat-Panel TV Articulating Wall Mount puts the best TV viewing experience front and centre.
Mounting | |
---|---|
Distance to the wall (max) | 19 cm |
Distance to the wall (min) | 6 cm |
Number of displays supported | 1 |
Panel mounting interface | 75 x 75,100 x 100,200 x 200 |
Maximum VESA mount | 200 x 200 mm |
Minimum VESA mount | 75 x 75 mm |
Mounting type | Wall |
Maximum screen size | 106.7 cm (42") |
Minimum screen size | 33 cm (13") |
Maximum weight capacity | 20 kg |
Ergonomics | |
---|---|
Tilt adjustment | Yes |
Cable management | Yes |
Swivel angle range | -90 - 90° |
Tilt angle range | -12 - 5° |
Design | |
---|---|
Housing material | Steel |
Product colour | Black |
Weight & dimensions | |
---|---|
Weight | 1.05 kg |
Height | 220 mm |
Width | 220 mm |
Packaging content | |
---|---|
Manual | Yes |
Logistics data | |
---|---|
Harmonized System (HS) code | 85299097 |
Other features | |
---|---|
Depth (max) | 19 cm |